My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

Energy chains online shop

Polymer energy chains for every movement. Filter according to dimensions, load and dynamic data and get the result quickly. A pre-selection of recommended energy chains makes it easier to find and supply energy in your application. Experts can find a total overview of all igus energy chains on the right.

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 380

triflex® R Series TRE

36.21 USD/ft
15 items, thereof ready for shipping:
13 in 24 hours
2 in 2 weeks
To the product page

autoglide 5 - steel cable floor guide - complete set | Travel 10 - 60m

1 complete set consists of:
 
+ energy chain
+ individual parts AG5 and AG
+ separators every 2nd link, pre-assembled
+ track holder for AG
+ upper run guide
+ mounting brackets for moving end
+ steel wire cable
+ cable tensioning unit
+ fixed end module
+ installation instructions
Upon request
104 items, thereof ready for shipping:
104 in 72 hours
To the product page

E2/000 energy chain, openable from both sides in the outer radius

Inner height [hi]: 21 - 45 mm
Inner widths [Bi]: 15 - 255 mm
Bend radii [R]: 35 - 300 mm
Pitch: 33.3 - 67 mm
 
  • Right mounting brackets can be found under "Suitable products"
  • Design: Openable from both sides along the outer radius
12.52 USD/ft
269 items, thereof ready for shipping:
268 in 24 hours
1 in 72 hours
To the product page

E2/000 energy chain, openable from both sides in the inner radius

Inner height [hi]: 21 - 45 mm
Inner widths [Bi]: 15 - 255 mm
Bend radii [R]: 35 - 300 mm
Pitch: 33.3 - 67 mm
 
  • Right mounting brackets can be found under "Suitable products"
  • Design: Openable from both sides along the inner radius
12.52 USD/ft
269 items, thereof ready for shipping:
269 in 24 hours
To the product page

Series E4Q.34 - can be opened without tools from both sides, with crossbars at every link

  • Inner height hi: 34 mm
  • Inner width Bi: 075-350mm
  • Bend radius R: 063-300mm
  • Pitch: 56m
  • Design: Openable from both sides
Upon request
110 items, thereof ready for shipping:
90 in 48 hours
To the product page
New

Intelligent system solution for retrofitting of energy chain E4.28 | For inner widths up to 300mm | For chain lengths from 10m to 30m

This smart plastics complete set for retrofitting consists of:

i.Sense components for condition monitoring: 
  • i.Sense EC.P for monitoring the push/pull forces 
  • i.Sense EC.B for breakage monitoring
  • i.Sense: module II for installation in the switch cabinet
  • Connecting cables

i.Cee predictive maintenance components: 
  • i.Cee: plus module II
  • i.Cee LIVE Dashboard on the local network
  • SMS module: for alerting without http connection 
  • Wear sensors
Upon request
50 items, thereof ready for shipping:
50 in 8 weeks
To the product page
New

e-spool® flex - uninterrupted panel feed | Extension length 5-15m

  • No slip ring
  • Without interruption (no slip ring), for energy,
    data, fluids and air
  • Space-saving
  • Universal assembly
  • Constant tensile strain on the cable
  • Cost-effective
  • Easy in case of repair
Note: Please consider VDE 0298 Part 5 (Current carrying capacity and conversion factors for wound cables) when selecting your cables and when using e-spool flex
Upon request
9 items, thereof ready for shipping:
9 in 8 weeks
To the product page

triflex® R TRC series

  • Energy tube
  • Enclosed design
  • Maximum swarf protection for cables
  • Bend radius R: 50 - 182mm
32.92 USD/ft
8 items, thereof ready for shipping:
8 in 24 hours
To the product page

Series E4Q.44 - can be opened without tools from both sides, with crossbars at every link

  • Inner height hi: 44 mm
  • Inner width Bi: 075 - 350mm
  • Bend radius R: 075 - 300mm
  • Pitch: 67 m
  • Design: Openable from both sides
Upon request
121 items, thereof ready for shipping:
88 in 48 hours
To the product page

H4Q.34 series – can be opened without tools from both sides, with crossbars every 2nd link

  • Inner height [hi]: 34 mm
  • Inside width [Bi]: 075 - 350 m
  • Bend radius [R]: 063 - 300 mm
  • Pitch: 91 mm
  • Design: Openable from both sides
Upon request
110 items, thereof ready for shipping:
80 in 48 hours
To the product page

H4Q.44 series – can be opened without tools from both sides, with crossbars every 2nd link

  • Design: Openable from both sides
Upon request
121 items, thereof ready for shipping:
88 in 48 hours
To the product page

triflex® R series TRL

  • Light version
  • Cost-effective
  • "easy" design
  • Simply press cables in
  • Bend radius R: 50 - 145mm
15.64 USD/ft
5 items, thereof ready for shipping:
4 in 24 hours
1 in 48 hours
To the product page

Complete set E4.32 | Travel: 8-24m | Inner height: 32mm

1 complete set consists of:
 
Energy chains of the  E4.32 series
+ mounting brackets
+ strain relief
+ separator
+ guide trough without glide bar
+ guide trough with glide bar
+ screwdriver
Upon request
108 items, thereof ready for shipping:
108 in 72 hours
To the product page

Series E4Q.58 - can be opened without tools from both sides, with crossbars at every link

  • Inner height hi: 58mm
  • Inner width Bi: 100-362mm
  • Bend radius R: 150-500mm
  • Pitch: 91 mm
  • Design: Openable from both sides
Upon request
176 items, thereof ready for shipping:
160 in 48 hours
To the product page

H4Q.58 range – can be opened without tools from both sides, with crossbars every 2nd link

  • Inner height hi: 58mm
  • Inner width Bi: 100-362mm
  • Bend radius R: 150-500mm
  • Pitch: 91 mm
  • Design: Openable from both sides
Upon request
176 items, thereof ready for shipping:
176 in 48 hours
To the product page
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries.
igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.